Adjusting The Brightness; Using The Sleep Timer - JVC xv-thm45 Instructions Manual

Basic operations
IMPORTANT
Before using the remote control for the following
operation,
• Set the remote control mode selector to
Remote control
mode selector
19
AUDIO
.

Adjusting the brightness

You can dim the indications on the display window and the
illumination lamp level on the center unit.
On the remote control:
Press DIMMER.
Each time you press the button, the brightness level changes as
follows;
] OFF ] DIMMER1 ] DIMMER2 ] (back to the
beginning)
• OFF: Returns to the normal level.
• DIMMER1: Dims the display window and the illumination lamp.
• DIMMER2: Dims the display window more than DIMMER1 and
turns off the illumination lamp.

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep while listening to music
and know the system will turn off by itself rather than play all night.
On the remote control:
Press SLEEP.
Each time you press the button, the shut-off time changes as
follows;
] 0min (cancelled) ] 10min (minutes) ] 20min ] 30min
] 60min ] 90min ] 120min ] 150min ] (back to the
beginning)
To check the remaining time until the shut-off time
Press SLEEP once.
• The remaining time until the shut-off time appears on the display
window for a while.
To change the remaining time until the shut-off time
Press SLEEP repeatedly.
• Each time you press the button, the shut-off time changes.
To cancel the Sleep Timer
Press SLEEP repeatedly until "0min" appears on the display
window.
• Turning off the power also cancels the Sleep Timer.
NOTE
• When DVD is selected as the source to play, the system can also turn
off automatically if playback is not restarted within the length of time
you have specified (Auto Standby function). (A pg. 53)
• When both the Sleep Timer and Auto Standby function are activated,
if the shut-off time set by the Auto Standby function comes earlier
than the one set by the Sleep Timer, the Auto Standby function
controls shut-off time.