Connecting The Power Cord - JVC xv-thm45 Instructions Manual

Getting started

Connecting the power cord

Make sure that all connections have been completed, before plugging in the power cords of the center unit and powered subwoofer.
1
Firmly insert the supplied power cord into the Ó AC IN socket on the rear of the center
unit.
2
Plug both power cords into AC outlets.
Center unit
Plug into AC outlets.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not touch the power cord with wet hands.
• Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp and pull the plug so as not to damage the cord.
NOTE
• Keep power cords away from other connected cords. The power cords may cause noise or screen interference.
• Preset settings, such as preset stations and surround mode adjustment, may be erased in a few days in the following cases;
If you unplug the power cord of the center unit.
•
If a power failure occurs.
•
• The speakers will not produce any sound if the power cord of the powered subwoofer is removed from the AC outlet while the center unit is turned on.
In this case, press F AUDIO on the remote control or F STANDBY/ON on the center unit to turn the power off, plug in the powered subwoofer,
then press F AUDIO or F STANDBY/ON again.
13
Power cord (supplied)
Power cord
Powered subwoofer