Replacing The Gas Pressure Spring For Lifter Support - Invacare Storm 3 Service Manual

Storm³
8.2.3

Replacing the gas pressure spring for lifter support

•
Raise the lifter if necessary (see page 39, chapt. 9.2.2).
•
Lever off locking washer (1) with screwdriver.
•
Drive out the bolt.
•
Unscrew hexagon cap nut (2).
•
Remove the Allen screw and spacer (3).
•
Remove gas pressure spring and replace.
Reassembly takes place in the reverse order.
Page 22
Service Manual
As at:07.03.02