Authentication Setting
The system administrator can enable/disable the User Authentication for each function (copying, faxing,
scanning, and printing).
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Note:
Default password is "00000000".
To change this password, select "85 Key Operator
Password" in the General Setting (For Key Operator),
and then re-enter the new password.
Select "60 - 79" tab, and then scroll the screen
and choose "75 User Authentication".
3
Select the function where authentication is
required, and then select "OK".
Continue on the next page...
13