Lockout Time Setting
This sets the time period (minutes) for the system lockout when the permitted number of logon attempts is
exceeded during the User Authentication. Wait for the Lockout Time period to lapse before you are permitted to
logon to User Authentication.
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK" .
Note:
Default password is "00000000".
To change this password, select "85 Key Operator
Password" in the General Setting (For Key Operator),
and then re-enter the new password.
Select "60 - 79" tab, and then scroll the screen,
and choose "79 Lockout Time".
3
Select "Input", and enter the lockout time
(1 to 60 minutes), and then choose "OK" .
Press the Reset key to return
to standby.
21