Fip-1. 39 Load Tray 2 024-966 - Dell 2130cn Service Manual

FIP-1. 39 Load Tray 2 024-966

Step
Possible causative parts:
HARN ASSY OPTION (PL3.1.20)
PWBA FEED H (PL12.1.1)
HARN ASSY TRAY COMP (PL12.2.20)
SENSOR PHOTO (PL12.4.13)
ACTUATOR NO PAPER (PL12.4.19)
Checking the paper for loading and setting
Check that the loaded paper meets the print job.
Check that the paper setting to require the print job meets
1
the specification.
Does the error still occur after reloading the paper and
chaging the paper settings that requires the print job?
Checking the ACTUATOR NO PAPER for shape and
operation
2 Pull the CASSETTE ASSY 250 (Option) out.
Are the shape and operation of the ACTUATOR NO PAPER
normal?
Checking the Cassette No Paper Sensor (SENSOR
PHOTO) for operation
Pull the CASSETTE ASSY 250 (Option) out.
3 Does the number on the screen increase by one, when the
actuator (ACTUATOR NO PAPER) of the Cassette No
Paper Sensor (SENSOR PHOTO) is operated?
Checked by [Digital Input] - [DI-9] in [IOT Diag] of diagnosis.
Checking the connectors of the SENSOR PHOTO
(Cassette No Paper Sensor) for connection
Check the connections between the PWBA FEED H and
SENSOR PHOTO.
Are P/J421 and P/J4212 connected correctly?
4
Checking the HARN ASSY TRAY COMP for continuity
Disconnect J23 from the PWBA MCU.
5
Disconnect J234 from the SENSOR PHOTO.
Is each cable of J421 <=> J4212 continuous?
Check
1 - 221
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. End of work.
Reseat the
ACTUATOR NO
PAPER. If broken
Go to step 3. or deformed,
replace the
ACTUATOR NO
PAPER.
Replace the
PWBA MCU.
(Refer to Removal Go to step 4.
43/ Replacement
11.)
Reconnect the
connector(s) P/
Go to step 5.
J421 and/or P/
J4212 correctly.
Replace the
Go to step 6. HARN ASSY
TRAY COMP.
No