Dell 2130cn Service Manual page 175

A
Checking the belt surface of the
TRANSFER ASSY
Are there any damages on the
belt surface of the TRANSFER
ASSY?
Yes
Replace the TRANSFER ASSY.
(Refer to Removal 21/
Replacement 33.)
No
Checking after replacing the PHD
ASSY
Replace the PHD ASSY. (Refer
to Removal 4/ Replacement 50.)
Is the image printed correctly?
Yes
END
Checking after replacing the
FUSER ASSY.
Reset the FUSER ASSY.
Is the image printed correctly?
Warning: Start the operation after
the FUSER ASSY has cooled
down.
After replacement, be sure to
clear the life counter value.
Yes
END
1 - 149
Chapter 1 Troubleshooting
No
No
Replace the printer.