Dell 2130cn Service Manual page 529

Chapter 3 Removal and Replacement Procedures (RRPs)
18) Release the hook of the GEAR ASSY
FEED (PL3.1.19), remove the GEAR
ASSY FEED from the SHAFT ASSY FEED
(PL3.2.2).
Note: When carrying out the work this
procedure, pushing down the LEVER
FEED (PL3.1.13).
19) Release the harness of the
SOLENOID FEED MSI (PL3.1.11) from the
hooks of the printer.
Note: When carrying out the work described next procedure, leave the relay connector on the
printer harness side.
20) Release the relay connector from the
rib of the printer, disengage the connecter
(P/J231) of the SOLENOID FEED MSI.
3 - 78