Dell 2130cn Service Manual page 612

Chapter 3 Removal and Replacement Procedures (RRPs)
5) Attach the connector of the HARN ASSY
TEST RL2 to the DISPENSER ASSY.
6) Mate the three holes of the FRAME
ASSY LVPS with the bosses of the printer,
attach the FRAME ASSY LVPS to the
printer together with the PWB ASSY FAN.
Note: Since two types of screws are used for securing the FRAME ASSY LVPS, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
7) Secure the DRIVE ASSY SUB to the
FRAME ASSY LVPS with the one screw
(silver, M4, 6mm).
3 - 161