Settings - A.O. Smith ADMR-40 Installation, User And Service Manual

11
Setting the switch-off time
1. Use and to set the hours. In the example, this
is 012.
Confirm with .
The cursor moves to the minute digits, which flash.
ON SU 08:15
OFF SU 12»15
Tset 65ÉC
PUMP ON START
2. Use and to set the minutes. In the example,
this is 45.
Confirm with .
The cursor moves to the water temperature. See
the figure
ON SU 08:15
OFF SU 12:45
Tset»65ÉC
PUMP ON START
Setting the water temperature
1. Use and to set the water temperature. In the
example this is 75°C.
Confirm with .
The cursor moves to PUMP ON
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP»ON START
Setting the program-controlled pump
1. If required, a pump can be controlled during the
period. Use and to set PUMP ON. The pump
ensures a regular circulation of hot water in the hot
water pipes. You can skip this step if you there is
no pump in your hot water circuit.
Confirm with .
The cursor moves to START.
ON SU 08:15
OFF SU 12:45
Tset 75ÉC
PUMP ON »START
2. Confirm with .
The extra period has been programmed.
Note
Once the extra period has completed running, the
controller returns to the mode ON, OFF or
WEEK PROGRAM. The following week, the extra
period will NOT be automatically switched on.
62
Main menu

11.6 Settings

Using the SETTINGS option, you can adjust certain
settings and read certain appliance data:
•
•
11.6.1
To set menu language:
MENU
^ EXTRA PERIOD
ȻSETTINGS
1. Call up the menu for selecting the language as
2.
SETTINGS
»LANGUAGE
^ DAY/TIME
È SPECIFICATIONS
3. The cursor is positioned beside LANGUAGE
LANGUAGE
^ NEDERLANDS
ȻDEUTSCH
4. Scroll with
The language is set.
Adjustable settings
- Language of the menu.
- Current day of week and time.
Displayable appliance specifications, this
category is only relevant to the installation
engineer and/or service and maintenance
engineer
- Control range (water temperature).
- Ignition speed of fan.
- Working speed of fan.
Setting menu language
WEEK PROGRAM
follows:
: SETTINGS.
Confirm with .
The display shows the menu for settings.
Confirm with .
The display shows the language selection menu.
ENGLISH
FRANCAIS
ITALIANO
CZECH
ESPANOL
to the desired language.
Confirm with .
Instruction manual ADMR
gis