Ambient Conditions - A.O. Smith ADMR-40 Installation, User And Service Manual

3
3.3

Ambient conditions

3.3.1
3.3.2
Weight of the appliance filled with water
ADMR 40 ADMR 50
504 kg 578 kg
3.3.3
18
Installation
Caution
The appliance may not be used in rooms where chemical substances are
stored or used, due to the risk of explosion and/or corrosion of the appliance.
Some propellants, bleaching agents, degreasing agents etc. disperse vapours
which are explosive and/or which cause accelerated corrosion. If the appliance
is used in a room in which such substances are present, the warranty will be
void.
ADMR appliances are open appliances and may only be installed in an open
boiler room. Their type is B
Air humidity and ambient temperature
The boiler room must be frost-free, or be protected against frost. The table
shows the environmental conditions that must be adhered to for correct
functioning of the electronics present in the appliance to be guaranteed.
Air humidity and ambient temperature specifications
Air humidity and ambient temperature
Air humidity
Ambient temperature
Maximum floor load
In connection with the appliance's weight, take account of the maximum floor
loading, refer to the table.
ADMR 60 ADMR 80
507 kg 573 kg
Water composition
The appliance is intended for heating drinking water. The drinking water must
comply with the regulations governing drinking water for human consumption.
The table gives an overview of the specifications.
Water specifications
Water composition
Hardness
(alkaline earth ions)
Conductivity
Acidity (pH value)
Note
If the water specifications deviate from those stated in the table, then the
tank protection cannot be guaranteed
.
11BS
max. 93% RV at +25°C
Functional: 0 < T < 60°C
ADMR 90 ADMR 115
522 kg 523 kg
> 1.00 mmol/l:
• German hardness> 5.6° dH
• French hardness > 10.0° fH
• English hardness > 7.0° eH
> 125 µS/cm
7.0 < pH value < 9.5
(16 "Warranty (certificate)").
Instruction manual ADMR
is
ADMR 135
581 kg