Specify Call Notification Behavior; Adjust The Ringer - Mitel 5330 User Manual

5330/5340 IP Phones – User Guide

Specify Call Notification Behavior

To specify that the Phone window automatically displays when you are making or receiving calls:
1. Press Settings.
2. Press Call Notification.
3. Press the appropriate options to identify when you want the Phone window to display. For
example, if you select the Made option, each time the phone goes off hook to make a call, the
Phone window is displayed.
4. Press Save.
Notes:
When To my prime line is selected, select Display Call Info to display Call Information instead of
the Phone window.
Press Cancel at any time to exit this application without making any changes.
.

Adjust the Ringer

To adjust the Ringer Volume while the phone is idle:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Ringer Adjust?" appears.
3. Press "Ring Adjust".
4. Press No.
5. Press "Ringer Vol".
6. Press (UP) or
7. Press Superkey.
Note: Adjusting ringer volume also adjusts cordless headset/handset ringer tone.
To adjust the Ringer Volume while the phone is ringing:
Press (UP) or
Notes:
If the phone is in talk state, this action adjusts the volume of the handset, headset or speaker.
If the phone is idle, this action adjusts the contrast.
To adjust the Ringer Pitch while the phone is idle:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Ringer Adjust?" appears.
3. Press "Ring Adjust".
(DOWN) .
(DOWN).