Calibrate Screen Display; Specify Call Notification Behavior - Mitel 5235 User Manual

Calibrate Screen Display

Your 5235 IP Phone screen display is calibrated before the phone is shipped.
However, if you notice that your phone is not performing as expected, it may
be necessary to recalibrate the screen display.
To calibrate the screen display:
1. Open the Settings shutter.
2. Press the scroll buttons (
listed.
3. Tap the center of the target with the stylus.
4. Continue tapping the center of the target as it moves around your
screen.
If the screen calibration is correct, the system displays Screen calibration
was successful. At this point, press OK.
If the screen calibration is incorrect, the system displays Screen
calibration failed. Calibration will be repeated in 5 seconds.

Specify Call Notification Behavior

To specify that the Phone shutter automatically displays when you are
making or receiving calls:
1. Open the Settings shutter.
2. Press the scroll buttons (
3. Press the Call Notification setting.
4. Press the appropriate options to identify when you want the Phone
shutter to display. For example, if you select the when making calls
option, each time the phone goes off hook to make a call, the Phone
shutter is displayed.
5. Press Save.
Notes:
Press Cancel at any time to exit this shutter without making any changes.
When the Conference Controller application is displayed, the Phone shutter
is not automatically displayed when making or receiving calls.
) until the Screen Calibration setting is
) until the Call Notification setting is listed.
-27-