Mitel 5330 User Manual page 34

5330/5340 IP Phones – User Guide
When the Handsfree Direct Page call ends, the MUTE key light returns to the state it was in before the
call was established.
DIRECT PAGING - HANDSFREE ANSWERBACK DISABLED
Your administrator enables or disables Handsfree Answerback and you can also turn it on or off on your
phone. To turn Handsfree Answerback off, see "Direct Paging - Handsfree Answerback Enabled"
elsewhere in this guide. When Handsfree Answerback is disabled on your phone and you receive a
Direct Page, the Direct Page is indicated by a single burst of tone.
To answer Direct Page calls when Handsfree Answerback is disabled:
Phone state before Page
arrives:
Phone is idle and MUTE is OFF.
You are on a handset call or
headset call, and MUTE is OFF
You are on a MUTED
handset/headset call, OR, you are
on a Handsfree call
To end a Direct Page call, do one of the following:
Hang up the handset to end a handset call.
Press (SPEAKER) to end a Handsfree call.
Press (CANCEL).
When the Handsfree Direct Page call ends, the (MUTE) key light returns to the state it was in before the
call was established.
To answer the Direct Page
(indicated by single burst of tone):
1. Check that MUTE is ON solid.
2. Lift the handset OR press the MUTE key to answer
in Handsfree mode. (The light turns OFF.)
3. Begin speaking.
1. Check that MUTE is flashing.
2,. Press MUTE. The light turns ON solid and you are
now speaking to the paging party and have MUTED
your handset/headset call.
3. Speak to the paging party. Press MUTE to alternate
between handset and handsfree calls.
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.