Show View ® System Setup - JVC DR-M10S Instructions Manual

Jvc dvd video recorder instructions
Hide thumbs Also See for DR-M10S:
Table of Contents

Advertisement

S
V
HOW
IEW
IMPORTANT:
Normally, Auto Set Up (
automatically. You need to set the Guide Program numbers manually only in the following cases.
When timer-programming with the S
your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,
—Set the Guide Program number for that station manually.
When you wish to timer-record a satellite programme with the S
—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
Guide Program Number Set
A
Access the Main Menu screen.
Press SET UP.
B
Access the "SAT/GUIDE PR" screen.
A Press w e to select
"INITIAL SET UP", then
press ENTER.
B Press w e to select "SAT/
GUIDE PR", then press
ENTER.
C
Enter the Guide Program number.
A Press rt to select "GUIDE PROGRAMME", then
press ENTER.
B Press rt to select the Guide Program number for the
desired station as shown in the TV listings. Then press
ENTER.
To change the Guide Program number in 10 increments, press
and hold rt.
System Setup
®
pg. 19), Preset Download (
V
system, the channel position, where the station you wish to record is received on
HOW
IEW
pg. 21) or Auto Channel Set (
V
system,
HOW
IEW
D
Enter the receiving channel position number.
A Press rt to select "TV PROGRAMME", then press
ENTER.
B Press rt to select the number of the unit's channel
position on which the Guide Program number's
broadcast is received by the unit or the satellite
receiver. Then press ENTER.
Pressing AUX changes "TV PROGRAMME" to "SAT".
To timer-record a satellite programme with the S
system, you need to install a provided Satellite Controller and
perform the procedure described in "Satellite Receiver Control
Setting" (
pg. 26).
Repeat steps C and D as necessary.
E
Complete the setting.
Press SET UP.
Guide Program Number
"Guide Program (GUIDE PROGRAMME) number" refers to
the assigned TV station numbers, according to broadcast
area, for the S
HOW
numbers can be found in most TV listings.
pg. 98) sets the Guide Program numbers
V
timer recording. The Guide Program
IEW
97
EN
V
HOW
IEW

Advertisement

Table of Contents
loading

Table of Contents