Buderus 600 - 11S User Manual page 2

Preface
Introduction
Please read these instructions and follow them carefully
for a safe and economical use of your boiler.
Important general instructions for use
This device should only be used for its intended purpose
and in accordance with the operating instructions.
It is the law and in your own interest, and that of safety
that this boiler must be installed by a CORGI registered
installer, in accordance with the relevant requirements of
the current Gas Safety (Installation and Use)
Regulations, The Building Regulations, current I.E.E.
Wiring Regulations and the relevant British Standard
Codes of Practice.
The device may only be used in combination with the
units, accessories and spare parts listed in the
installation and servicing instructions.
Other combinations of units, accessories and
consumables are only to be used if they completely fulfil
the specifications involved, and if system performance
and safety are not affected in any way.
Subject to technical modifications
As a result of our policy of constant development,
there may be small differences with respect to
illustrations, functional steps and technical data.
Cleaning
For normal cleaning simply dust with a dry cloth.
To remove stubborn marks and stains, wipe with a damp
cloth and finish off with a dry cloth.
DO NOT use abrasive cleaning materials.
Subject to modifications resulting from technical improvements! Boulter Buderus Ltd. • http://www.boulter-boilers.com
2 Operating instructions for 600 - 11S /19S / 24S / 24C • Edition 11/2003