Changing Vcr Plus+ Setting - JVC DR-M100S Instructions Manual

SUBSIDIARY SETTINGS
62
EN

Changing VCR Plus+ Setting

The VCR Plus+ programming system assigns a VCR Plus+ guide
channel number to the TV channels and the cable channels. These
guide channel numbers are also called the VCR Plus+ channel
codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station. To ensure that
VCR Plus+ timer recording operates correctly, it is necessary to
set the VCR Plus+ Guide Channel for each station.
If you have moved to a different area or if a broadcasting station's
channel number has been changed, perform the steps on the right
column to set the correct guide channel number.
NOTES:
●
In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your unit. Check your TV
listing, or contact your cable supplier for details.
●
Many TV stations can be viewed on cable. Check your TV listing,
or contact your cable supplier for details.
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
FGD E
Selection Keys ( )
ENTER
SET UP
Guide Channel Number Set
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to
select "INITIAL SET UP",
then press ENTER.
3
Press selection keys to
select "TUNER SET",
then press ENTER.
4
Press selection keys to
select "GUIDE
CHANNEL SET", then
press ENTER.
5
Press selection keys to
select "GUIDE CH", then
press ENTER.
6
Press selection keys to
select the Guide
Channel number for the
desired station as shown in the TV listings, then press ENTER.
●
To change the Guide Channel number in 10 channel
increments, press and hold F G.
7
Press selection keys to select "DVD CH", then press ENTER.
8
Press selection keys to select the channel number of the unit
on which desired broadcast is received, then press ENTER.
● Repeat steps 4 - 8 as necessary.
9
Press SET UP to complete the setting.
Guide Channel Number
"Guide Channel (GUIDE CH) Number" refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
DVD SET UP FUNCTION SET UP INITIAL SET UP
TUNER SET CLOCK SET
BAND CATV
AUTO CH SET
MANUAL CH SET
GUIDE CHANNEL SET
SET UP OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
DVD SET UP FUNCTION SET UP INITIAL SET UP
INITIAL SET UP / GUIDE CHANNEL SET
GUIDE CH 1
DVD CH ---
RETURN
SET UP
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT