BASIC OPERATIONS ON DVD DECK
24
EN
M
TOP MENU
MENU
S
O
SLOW –
/
o
REMAIN
SUBTITLE
Slow Motion
1
Press W to pause during playback.
2
Press SLOW – (O), then press SLOW + (N).
●
Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
●
Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
OR
Press and hold S or T for 2 or more seconds.
●
Releasing the button resumes normal playback.
Skip Search
Press v during playback.
●
Each press initiates an approximately 30 second period of fast-
motion playback. Normal playback resumes automatically.
●
This function is not possible when playing back a Video CD using
the PBC function.
One Touch Replay
You can move back the playback position slightly.
Press w.
●
Each press skips back for approximately 7 seconds and resumes
playback.
●
Pressing while paused skips back for approximately 7 seconds
and resumes pause.
●
This function is not possible when playing back a Video CD using
the PBC function.
DVD A
MARK
FGD E
Selection Keys (
)
ENTER
I
T
N
SLOW +
/
W
v
w
ANGLE
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
●
Be sure to set ARESUMEB
to AONB or ADISC
RESUMEB. (A pg. 60)
ATTENTION:
When a playback-only disc is played, pressing o once results in
a blue screen. To perform Resume Function with these discs,
follow the procedures as described below under the blue screen
condition.
1
Press o during playback to memorize a resume point.
●
The unit enters Resume Stop mode and memorizes the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorizing.)
●
The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 60)
●
To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When ARESUMEB is set to AONB:
DVD A
• Press
to turn off the unit.
M
• Press
to take out the disc.
o
• Press
in stop mode.
TOP MENU
• Press
to display the top menu, then start playback by
selecting an item, etc.
MENU
• Press
to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
• ARESUMEB must be set to AOFFB. (
o
• Press
in stop mode.
TOP MENU
• Press
to display the top menu, then start playback by
selecting an item, etc.
MENU
• Press
to display the disc menu, then start playback by
selecting an item, etc.
2
Press I in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
●
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
finalized DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under AONB setting will be applied even if
ARESUMEB is set to ADISC RESUMEB. (A pg. 60)
●
If you stop the playback of a disc for which a resume point has
already been memorized, the memory will be updated with the
new resume point.
●
After the unit has memorized the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
●
When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
●
This function may not work for some Video CD/SVCDs.
●
When ARESUMEB is changed to AONB or AOFFB (A pg. 60),
resume points of the discs memorized with ARESUMEB set to
ADISC RESUMEB will be cleared.
●
Resume points are memorized for each side of a double-sided
disc.
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT
RECORDING SET DISPLAY SET
AUTO TIMER
OFF
RESUME
ON
SET UP
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
A
pg. 60)
OTHERS