Introduction
Use the BSR 64000™ Quick Start Guide to unpack the product, connect it to the
network, and establish minimal operation.
Note: Detailed installation procedures and configuration and management
procedures are covered in the BSR 64000 product documentation set.
Follow these basic configuration tasks to make the BSR 64000 operational:
•
Configuring the Servers
•
Physically Install the BSR
•
Accessing the CLI to Set System Passwords
•
Specifying System Time Information
•
Configure SNMP
•
Configure the Ethernet IP Address
•
Configure Cable IP Address
•
Configure the POS Module
•
Configure Routing
•
Configure the CMTS
•
Save the Configuration
Quick Start
1