Motorola BSR 64000 Quick Start Manual page 16

BSR 64000 Quick Start Guide
2. To set the password for a telnet session that allows access to the BSR in User
EXEC mode, use the password telnet command in Global Configuration mode,
as shown below:
RDN(config)# password telnet {0 | 7} <password>
where:
3. To set the Privileged EXEC password, use the enable password command, as
shown below:
RDN(config)# enable password {0 | 7} <password>
where:
4. Automatic encryption is disabled by default. If you want to encrypt all currently
unencrypted passwords and all future passwords entered on the BSR, use the
service password-encryption command in Global Configuration mode, as
shown below:
RDN(config)# service password-encryption
If you want to turn off the service password encryption feature so that passwords
entered in the future are no longer encrypted, use the no service
password-encryption command in Global Configuration mode, as shown below:
6
0 indicates that the following password is unencrypted (clear text).
7 indicates that the following password is encrypted.
password is the user-defined unencrypted password for the BSR that is no
more than 31 characters.
0 indicates that the following password is unencrypted (clear text).
7 indicates that the following password is encrypted.
password is the user-defined unencrypted password for the BSR that is no
more than 31 characters.