Engineering Mode Overview - Horizon Fitness Casall T600 Service Manual

4.2 ENGINEERING MODE OVERVIEW

MODE FUNCTION
ENG 0 Display Test
ENG 1 Hardware Test
ENG 2 Auto Calibration
ENG 3 Switch Function
ENG 4 Information
Software Version
SECOND LEVEL
ENG 8
※ ※ ※ ※ "START" key to save the change.
CHAPTER 4: Engineering Mode
Start Key – LCD/LED on
Stop Key – LCD/LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
Motor & Incline Motor Test.
Digital MCB, unnecessary to do Auto Calibration. Press the START
key, the words "NO FUNCTION" will scroll on the screen.
Use the INCLINE or SPEED UP and DOWN keys to switch DEMO
MODE off or on (Demo on=1 & Demo off=0 on the bottom window)
Use the START key to select unit (1=KM & 0=Mile on the bottom
window)
Use the ENTER key to select the languages.(English, Germany, Dutch,
French will scroll on the bottom window). Press the ENTER key to
withdraw the languages selection.
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
Remarks: Unit of Time is Hour on the TIME window.
Unit of Distance is KM or Mile based on your set on the
DISTANCE window.
To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP
and INCLINE DOWN key at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (normal or quick).
Press ENTER at P3 - Hold the START key to clear all data.
DESCRIPTION
14