MasterCraft 55-6896-2 Owner's Manual page 5

doubt, use the next heavier gauge: the smaller the gauge number, the heavier
the cord.
Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings,
bracelets, or other jewellery that may get caught in moving parts. Non-slip
footwear is recommended. Wear a protective hair covering to contain long hair
Wear a facemask or a dust mask. Sawing operations produce dust.
Secure the work. Use clamps or a vise to hold the work. It is safer than using
the hand/body, and it frees both hands to operate the Compound Mitre Saw.
Disconnect tools before servicing the tool and when changing accessories,
such as blades, bits, and cutters.
Reduce the risk of accidental start-ups. Make sure the switch is in the OFF
position before plugging in the tool.
Only use recommended accessories. Consult this Owner's Manual for
recommended accessories. The use of improper accessories may cause a risk
of injury to the operator or to others.
Never stand on the tool. Serious injury could occur if the tool is tipped or if
the cutting tool is unintentionally contacted.
WARNING: The operation of any tool can result in foreign objects be-
ing propelled into the eyes, which could result in severe eye damage. When
operating a power tool, always wear safety goggles or safety glasses with side
shields, or a full face shield, if necessary.
Check for damaged parts. Any guard or other part that is damaged should
be carefully checked to determine that it will operate properly and perform its
intended function before using the tool. Check for misalignment or binding of
moving parts, broken parts, mounting, and any other condition that may affect
the operation of the tool. A guard or other part that is damaged should be
properly repaired or replaced before using the tool.
Never leave the tool unattended while the power is "on." Turn the power
"off". Do not leave the tool until the blade has come to a complete stop and
the Mitre Saw has been unplugged.
Do not overreach. Keep proper footing and balance at all times.
Maintain tools with care. Keep tools sharp and clean for optimum
performance. Follow instructions for lubricating and changing accessories.
CAUTION: Do not attempt to operate this tool until you have thoroughly
read all instructions, safety rules, and warnings. Failure to comply can result
in fire, electric shock, or serious personal injury. Keep the Owner's Manual for
future reference, and review it frequently.
5