Using The Remote Control Unit; Remote Sensor - JVC GR-DVL300 Instructions Manual

40
EN
1
2

Remote sensor

USING THE REMOTE CONTROL UNIT

3
Tab
+
–
–
+
Transmitted beam
effective area
5m (16 ft)
30°
The Full-Function Remote Control Unit can operate this
camcorder from a distance as well as the basic operations
(Playback, Stop, Pause, Fast-Forward and Rewind) of your
VCR. It also makes additional playback functions possible.
Installing The Batteries
The remote control uses two "AAA (R03)" size batteries.
See "General Battery Precautions" (
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two "AAA (R03)" size batteries in the correct
direction.
3
Re-attach the battery compartment cover.
When using the remote control, be sure to point it at the
remote sensor. The illustration shows the approximate
transmitted beam effective area for indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the remote
sensor is directly exposed to sunlight or powerful
lighting.
30°
pg. 64).