4.4 Change acceleration and deceleration time (Pr.7, Pr.8)
Set in Pr.7 Acceleration time a larger value for a slower speed increase and a smaller value for a faster speed increase.
Set in Pr.8 Deceleration time a larger value for a slower speed decrease and a smaller value for a faster speed decrease.
Parameter
Name
Number
7
Acceleration time
8
Deceleration time
* Depends on the Pr.21 Acceleration/deceleration time increments setting. The initial value for the setting range is "0 to 3600s" and setting increments
is "0.1s".
Changing example
Change the Pr. 7 Acceleration time setting from "5s"