Table of Contents
Advertisement
Aft Cabin
Cushions
Figure N3: 268V Mid Cabin Cushions
Waste/Water Tank
Lids
Fuel Lid
Figure N4: 268V Mid Cabin Access Lids
N - 2
EXTERIOR SEATING
A.
Helm Seat
The helm seat is standard and can seat two or three
people comfortably. A manual, slider mechanism is
mounted under the driver’s seat. This allows the driver
of the boat to adjust his portion of the helm seat to meet
his or her needs. To adjust, rotate the lever below the
pilot’s seat upward and slide the seat forward or aft to
the desired position. There is approximately six inches
of adjustment available. See Figure N5.
Vista 248/268 Owner’s Manual
03/00
Helm Seat
Slider
Figure N5: Helm Seat and Slider Mechanism
DO NOT sit on the backrest portion of any cock-
pit seat. The helmsman could lose control of
the boat or passengers could be thrown from
the boat. The seat could also be damaged if
excessive force is applied.
B. Stern Seat
The custom U-shape stern seat includes support legs
and fiberglass base. The U-shape seating arrangement
continues around the back of the boat to create more
usable seating area. Refer to Figure N6.
A stern seat fill-in cushion is optional and extends the
cushion area for such things as sunbathing, napping or
overnight sleeping. The aft fill-in cushion support is
folding and is stored underneath the stern seat. Refer
to Figure N7.
The aft cockpit stern seat cushion can be removed by
lifting up and out. This allows for easier access to the
engine. Refer to Figure N8.
Lever
Section N
Page 2
Advertisement
Table of Contents
