Table of Contents
Advertisement
N - 1
INTERIOR SEATING
A. Cabin Tables
A cherry dinette is standard on the 248/268 and is con-
veniently located in the forward cabin. Table bases are
“flush” mounted for convenience. Table legs are remov-
able. Rotating the leg while lifting will ease the removal.
See Figure N1. The leg may be stored in the v-berth
storage compartment.
Floor
Mount
Figure N1:248/268V Dinette Table
The forward area can be converted into sleeping quar-
ters with the use of filler cushions and v-berth fill-in table
(not to be confused with the cherry dinette table). (Note:
The filler cushions are also the backrest cushions). To
convert the v-berth area into a sleeping berth follow the
steps below:
1. Remove the cherry dinette table from the table leg.
2. Remove the leg from its floor mount. Rotating the
leg while lifting will ease the removal.
3. Place the v-berth fill-in table into the recessed por-
tion of the v-berth storage compartments.
Vista 248/268 Owner’s Manual
03/00
UPHOLSTERY
4. Remove the backrest cushions and place them on
the fill-in table.
Reverse this procedure to return the berth back into a
dinette.
Storage for the cherry dinette table or v-berth fill-in table
is located in the aft cabin against the bulkhead.
B. V-berth or Forward Cabin
Four Winns® provides cushions for the v-berth/forward
cabin area. These cushions simply drop into place. To
gain access to the v-berth storage simply remove the
cushions and storage lids. See Figures N2.
Dinette
Table
Forward
V- Berth
Cushion
Port
Table Leg
V-Berth
Cushion
C. Mid Cabin (Aft Cabin) Berth
The mid cabin provides a large berth and includes a
window for ventilation. The mid cabin has a storage
shelf, plus a hanging storage locker, and privacy cur-
tain. Also, access lids are installed below mid cabin cush-
ions for servicing the fresh water and waste tanks, fuel
tank, and other equipment. See Figures N3 and N4.
Figure N2: 248/268V V- Berth Cushions
Starboard
V- Berth
Cushion
Section N
Page 1
Advertisement
Table of Contents
