Pro-Form PFEL04912.1 User Manual page 8

3. Remove the indicated screw and the shipping
bracket from the Base (1). Discard the screw
and the shipping bracket.
Next, tighten the Base Foot (26) into the
Base (1).
4. Attach the Rear Stabilizer (7) to the Frame (2)
with two M10 x 127mm Screws (83).
Next, hold the handle on the Frame (2), press
the Latch (68), and lower the Frame until the
Rear Stabilizer (7) rests on the floor.
3
26
4
Handle
8
1
Shipping
Bracket
Screw
83
7
2
68