Wireless-G Broadband Router with 2 Phone Ports
3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet
adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
NOTE: The MAC address is also called the Physical Address.
The example shows the Ethernet adapter's IP address as 192.168.1.100. Your computer may show something
different.
For the Router's Web-based Utility
You can use MAC or IP addresses to designate computers for each Internet Access Policy you create. To specify a
computer, enter its IP address or 12-digit MAC address.
For MAC address cloning, enter the 12-digit MAC address in the fields provided, two digits per field.
For more details, refer to "Chapter 5: Configuring the Router."
Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter
For the Router's Web-based Utility
Figure D-3: MAC Address/Physical Address
Figure D-4: Access Restrictions -
MAC and IP Addresses
Figure D-5: MAC Address Clone
65