Installation; Roles And Responsibilities - Xerox Color C60/C70 Series Installation Manual

Installation

4 Installation

Roles and Responsibilities

This section is key to clearly state Xerox and the customer roles and responsibilities and necessary actions.
Responsibility Matrix
Action
Ensure adequate space and power to configure the C60/C70
Unpack system / components
Install system hardware (excluding envelope Tray)
Install Envelope Tray
Connect all System Components prior to powering up the system
Ensure network configuration
Confirm network integrity
Acquire and install client software including print drivers
Configure Workflow Scanning
Run initial software diagnostics when directed
Monitor and adjust as required
Load any additional fonts
Procure BNC transceiver for network connection (if needed)
Order and replace SMart Kits (Drum cartridges, Second Bias Transfer Roll,
transfer belt cleaner, and Waste Toner Cartridge, etc.) as needed.
Provide Help Line support
Provide spared parts
Provide service
Primary customer C60/C70 applications:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
Special considerations or performance limitations identified by Xerox and agreed to by the customer:
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________
Customer Expectation and Installation Guide
Xerox Color
Customer Xerox
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
®
C60/C70
22