Envelope Feeding Guidelines/Limitations - Xerox Color C60/C70 Series Installation Manual

Detailed Specifications
Envelopes
The XeroxC60/C70 currently supports running the following envelope types through Tray 5. Depending on thickness, up to 50
envelopes can be loaded. Envelopes can also be fed from OHCF Trays 6 & 7 with the small media bracket installed. Stack heights in
these trays may need to be reduced if jams are encountered with various envelope
Envelope Type/Size
Monarch
3.87in x 7.50in
98.4 X 190.5mm
Commercial #10
4.12in x 9.50in
104.8mm X 241.3mm
Envelope: Chou-kei3
120.0mm X 235.0mm
Envelope: Kaku-ga
240.0mm X 332.0mm
Envelope C4
229.0mm X 324.0mm
Envelope C5
162.0mm X 229.0mm
**Note: Please be aware that envelopes are not intended to be a primary media for this product.

Envelope Feeding Guidelines/Limitations:

• Envelope should be run using media type "heavyweight 2", "face-up" selected.
• Envelopes should be run open flap to the left (trail edge) which provides the best wrinkle free results. It is not recommended to run closed flap
because it is more susceptible to wrinkles, creases, light image, and the flap sealing during the run.
North American envelopes will only run in Custom Size Mode with manually inputting the size indicated above. These dimensions include a
•
commercial style open flap (specific dimensions for the envelopes being used should be entered, including flap size).
• Some European envelope sizes can be programmed as a default on the UI in Tools.
Envelope Basis Weight must be between 75 to 90 GSM.
•
Bypass tray can handle SEF stacks of 30 – 50 envelopes.
•
Stacking capacity in SCT varies from approx. 30 to 100 envelopes.
•
• Frequent jams or damage may occur with certain size envelopes & flap designs.
• Image Quality may be compromised when running various flap & seam designs.
Maximum reliable LEF / flap open exit tray stack height is less than 10 envelopes.
•
Maximum reliable SEF stack height in SCT is 30 – 50 envelopes
•
Other variables that can affect envelope feeding performance:
•
Envelope brand, size, weight, and seam configuration.
•
• Flap design, size, and shape.
• Orientation of Flap in feed trays – Inboard or Outboard.
Storage / environmental conditions, and age of envelopes.
•
Output devices used.
•
Customer Expectation and Installation Guide
Feed Direction Flap Open
LEF
LEF
SEF
SEF
SEF
SEF
Xerox Color
types.
UI Tools Input
Custom Paper Size
7.5in x 6.7in
190.0mm X 170.0 mm
Custom Paper Size
9.45in x 6.81in
240.0mm X 173.0 mm
Default Input Size when customized in tools
Default Input Size when customized in tools
Default Input Size when customized in tools
Default Input Size when customized in tools
®
C60/C70
12