One Piece Doors; Attaching Door Bracket To Door; Attaching Door Arm To Door Bracket - Genie SC 1500, TriloG 1200 Operation & Maintenance Manual

5
One-Piece Doors

ATTACHING DOOR BRACKET TO DOOR

1
Using bracket, mark holes on door or frame and drill
5/32" hole completely through door frame.
Door centerline Door centerline
NOTE: Center bracket on door as high as possible, preferably top edge.
2
Secure bracket with 5/16" x 2" or 5/16" x 4-1/2" carriage
bolts and nuts or drill 1/8" pilot holes and secure with 1-1/2"
to 2" lag bolts. (Bolts, nuts, and screws not furnished.)

ATTACHING DOOR ARM TO DOOR BRACKET

1a
Screw drive models:
One-Piece Doors will only accept a straight door arm.
3/8"-16 x 7/8"
Bolt
Straight door arm (not included) Straight door arm (not included)
1b
Chain/belt drive models:
One-Piece Doors will only accept a straight door arm.
3/8"-16 x 7/8"
Bolt
Straight door arm (not included) Straight door arm (not included)
2
Secure door arm to the door bracket and with clevis pin
and cotter pin.
Door bracket Door bracket
Clevis pin Clevis pin
Curved door arm Curved door arm
3/8" Lock nut 3/8" Lock nut
Straight door arm Straight door arm
3/8" Lock nut 3/8" Lock nut
Cotter pin Cotter pin
Straight door arm Straight door arm
15