Genie 2562 Programming, Operation & Maintenance Manual

Serial Number Decal
BELT/CHAIN/SCREW DRIVE
GARAGE DOOR OPENER MODELS:
2562, 2568, 3022, 3024, 3042, 3062 , 3064, 4024, 4042, 4062,
4064, 5042, SC1200, CB1000, CB1200
PROGRAMMING,
OPERATION &
MAINTENANCE
MANUAL
Includes INTELLICODE® Remote Control. Safe-T-Beam® system must be installed to close the door. For use only with
residential One-Piece or Sectional Overhead Garage Doors. Homelink® and Car2U® compatible
STOP
INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
To reduce the risk of injury to persons or damage to property, use this opener only with a one-piece or sectional residential door.
Por réduire le risque de blessures ou de dommages materials, utilisez cet ouvre-porte uniquement pour une porte à section ré sidentielle.
©2015 The Genie® Company, the Genie Logo, Intellicode® and Safe-T-Beam®, are trademarks of GMI Holdings, Inc. d/b/a The Genie® Company.
All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvements, we reserve the right to change product speci cations without
prior notice or obligations. HomeLink is a registered trademark of Gentex Corporation. Car2U is a registered trademark of Lear Corporation.
Need help or have questions?
For answers and assistance,
visit www.GenieCompany.com
or call Customer Service at: 1-800-35-GENIE
WARNING
AVERTISSEMENT
PRE-PROGRAMMED
REMOTE
INCLUDED
FOR QUICK
& EASY
INSTALL
38209502755
38267502755