Table of Contents
Advertisement
DC Inverter Floor Ceiling Type Air Conditioner Installation and Operation Manual
2. Buttons
2.1 Silk Screen of Buttons
2.2 Instruction to Function of Buttons
No.
Description
1
Enter/Cancel
2
▲
6
▼
3
Fan
4
Mode
5
Function
7
Timer
8
On/off
4 Mode
Memory
and
function
2 ▲
2 ▲
and
Lock
6 ▼
Fig.3 Silk Screen of Buttons
Table 2 Instruction to Function of Buttons
① Function selection and canceling;
② Press it for 5s to enquiry the outdoor ambient temperature.
① Running temperature setting of indoor unit, range :16 ～ 30°C;
② Timer setting, range:0.5-24hr;
③ Switchover between quiet/auto quiet .
Setting of high/middle/low/auto fan speed.
Setting of cooling/heating/fan/dry mode of indoor unit.
Switchover among these functions of air/sleep/turbo/save/e-heater/blow/quite.
Timer setting.
Turn on/off indoor unit.
Press Mode and ▲for 5s under off state of the unit to Enter/Cancel key memory function
(If memory is set, indoor unit will resume original setting state after power failure and then
power recovery. If not, indoor unit is defaulted to be off after power recovery. Memory
function is defaulted to be set before outgoing.)
Upon startup of the unit without malfunction or under off state of the unit, press ▲ ▼ key
at the same time for 5s in to lock state. In this case, any other buttons won't respond the
press. Repress ▲ ▼ key for 5s to quit lock state.
Function of Button
5
Advertisement
Table of Contents
