Table of Contents
Advertisement
3 BUTTONS
3.1 Silk Screen of Buttons
3.2 Instruction to Function of Buttons
No.
Description
1
Enter/cancel
2
▲
6
▼
3
Fan
4
Mode
5
Function
7
Timer
8
On/off
4 Mode
Memory
and
function
2 ▲
2 ▲
and
Lock
6 ▼
Enquiry
4 Mode
and setting
and
of address
5 Function
of wired
controller
Fig. 3.1 Silk screen of buttons
(1)Function selection and canceling;
(2)Press it for 5s to enquiry the outdoor ambient temperature.
(1)Running temperature setting of indoor unit, range :16 ～ 30 ℃
(2)Timer setting, range:0.5-24hr
(3)Switchover between quiet/auto quiet
Setting of high/middle/low/auto fan speed
Setting of cooling/heating/fan/dry mode of indoor unit
Switchover among the functions of air,/sleep/turbo/save/e-heater/blow /
quiet
Timer setting
Turn on/off indoor unit
Press them for 5s under off state of the unit to enter/cancel memory
function (If memory is set, indoor unit after power failure and then power
recovery will resume original setting state .If not, indoor unit is defaulted
to be off after power recovery. Memory function is defaulted to be set
before outgoing.)
Upon startup of the unit without malfunction or under off state of the unit,
press them at the same time for 5s in to lock state. In this case, any other
buttons won't respond the press. Repress them for 5s to quit lock state.
Press them for 5s under unit off at the same time to set address.
Table 3.1
4
Function of Button
Advertisement
Table of Contents
