The Notebook Cannot Be Started; The Notebook Stops Working - Fujitsu Siemens Computers AMILO Pa series Easy Manual

Troubleshooting and tips

The notebook cannot be started

Cause
The battery is not installed correctly.
The battery is dead
The mains adapter is not connected
correctly.

The notebook stops working

Cause
The notebook is in Standby or
Suspend mode.
An application programme has
caused the malfunction.
The battery is dead
60
Troubleshooting
► Switch the notebook off.
► Check whether the battery is installed correctly in its
compartment.
► Switch the notebook on.
► Charge the battery.
Or
► Install a charged battery.
Or
► Connect the mains adapter to the notebook.
► Switch the notebook off.
► Check whether the mains adapter is connected
correctly to the notebook.
► Switch the notebook on.
Troubleshooting
► Reactivate the notebook by pressing a key (Standby
mode) or by switching it back on (Suspend mode).
► Close the application programme or restart the
notebook by switching it on/off or with a warm boot.
► Charge the battery.
Or
► Install a charged battery.
Or
► Connect the mains adapter to the notebook.
10600718673, edition 1