The Notebook Cannot Be Started; The Notebook Stops Working - Fujitsu Siemens Computers AMILO Xi Series Getting Started

Troubleshooting and tips

The notebook cannot be started

The battery is not installed correctly
► Switch the notebook off.
► Check whether the battery is installed correctly in its compartment.
► Switch the notebook on.
The battery is dead
► Charge the battery.
Or
► Install a charged battery.
Or
► Connect the mains adapter to the notebook.
The mains adapter is not connected correctly
► Switch the notebook off.
► Check whether the mains adapter is connected correctly to the notebook.
► Switch the notebook on.

The notebook stops working

The notebook is in Standby or Suspend mode
► Reactivate the notebook by pressing a key (Standby mode) or by switching it back on (Suspend
mode).
An application programme has caused the malfunction
► Close the application programme or restart the notebook by switching it on/off or with a warm
boot.
The battery is dead
► Charge the battery.
Or
► Install a charged battery.
Or
► Connect the mains adapter to the notebook.
22 - English 10600690744, edition 1