The External Monitor Is Blank Or The Image Is Unstable; The Notebook Cannot Be Started - Fujitsu Siemens Computers Amilo Mini Operating Manual

Troubleshooting and tips

The external monitor is blank or the image is unstable

Monitor Screen
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.

The notebook cannot be started

Notebook
Cause
The battery is not installed correctly.
The battery is dead.
The power adapter is not connected correctly.
48
Troubleshooting
► Terminate the application program in
Windows by pressing
fault persists after closing the program,
switch over to the notebook's internal LCD
screen with
Fn
following setting:
► Set the screen resolution: Select the
required resolution with Startsymbol –
(Settings) – Control Panel – Appearance and
Personalization – Personalization: Adjust the
screen resolution as required.
► Select monitor: Right-click on the desktop.
Under Personalization – Display Settings
choose monitor 1 or 2 and under Advanced
Settings – Monitor choose the correct monitor.
Troubleshooting
► Switch the notebook off.
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
► Switch the notebook off.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
AMILO Mini Operating Manual, edition 2
Alt + F4 . If the
+ . Change the
F10