Avaya DECT R4 Installation Manual page 35

6. Select the Gateway tab.
a. If you want to use anonymous handset subscription, select the Auto-Create Extension and Auto-Create
User options.
b. For a provisioning installation select Enable Provisioning.
c. In the SARI/PARK field enter the SARI code that will be provided to the master base station.
d. In the Subscriptions drop down select either Auto-Create or Preconfigured.
· Auto-Create
If you select this option, extension and user entries are automatically created in the IP Office configuration
when a new handset is subscribed. Use this option for anonymous subscription. Ensure that the Auto-
Create User and Auto-Create Extension settings are also selected. For a provisioned installation, this
mode should be used if the installation includes just 3720, 3725, 3740 and 3749 phones.
· Preconfigured
If you select this option, handset will only be able to subscribe if they match an existing IP DECT extension
configured in the IP Office configuration, including an IPEI. For a provisioned installation, this mode should
be used if the installation includes a mix of 3720, 3725, 3740, 3749 phones and other DECT phones.
· Disabled
After installation and subscription of the handsets, this option can be selected to prevent the further
subscription of handsets.
· In the Authentication Code field enter the numeric code that handset should enter during the
subscription process. This needs to be 4 to 8 digits long.
7. Save the configuration back to the IP Office system.
DECT R4
IP Office Release 7.0
Provisioned Installation: IP Office Configuration
15-601047 Issue 03a (21 February 2011)
Page 35