8.5.7 Check the Base Stations
Through the configuration of the slave and the master base status it is possible to check the signalling between the base
stations.
Slave Base Station
1. In the left-hand column select Device Overview. Select the Air Sync tab.
Master Base Station
1. In the left-hand column select Device Overview. Select the Radios tab. The details of the base stations within
the system are displayed.
2. Select the Air Sync tab. The status of wireless synchronization between the master and other base stations is
displayed.
DECT R4
IP Office Release 7.0
15-601047 Issue 03a (21 February 2011)
Page 152