Radio Panid - Honeywell FMC2000 User Manual

FMC2000, it sends an acknowledgement that it received the
message back to the monitor.
The FMC2000 can check this synchronization once or at intervals. The
one-time check is called "Sysch," while the others are labeled by their
time intervals of 10, 20, and 30 minutes.
1. Press Enter. Four check boxes are shown:
Synch
Auto:
2. Press the down arrow to step through the options. The check
mark shows in the selected box.
3. Once your selection is made, press Exit or Back.

18.1.3 Radio PanID

Set the wireless Pan ID. The current Pan ID is shown.
To change the Pan ID:
1. Press Enter. A box appears, saying "PanID(0~999):" This
prompts you to set a Pan ID number.
2. Set a Pan ID number using the number keys on the keypad.
3. Press Enter to make and save a selection. Otherwise, press
Back to return to the Wireless Modem menu without saving
your changes, or press Exit to return to the monitoring screen
without saving your changes.
Make sure all monitors in the network have the same Pan ID
number in order to communicate within the network. If you
change the Pan ID number on the FMC2000, make sure you check
the other Pan IDs.
FMC2000 User's Guide
10Min
20Min
30Min
IMPORTANT!
63