Alarm Light; Backup Configuration; Restore Configuration - Honeywell FMC2000 User Manual

14.8 Alarm Light

This sets whether the alarm light on top of the FMC2000 glows
when the system is in alarm.
1. Press the up or down arrow to select Enable or Disable.
2. Press Enter.

14.9 Backup Configuration

This backs up the FMC2000's configuration to the SD card.
Press Enter. The display shows the message, "Confirm?"
Then do one of the following:
• Press Enter to confirm and back up the configuration.
• Press the left arrow to exit.
• Press the right arrow to go back.
You can edit the configuration file and change settings on a PC
using a text-editing program. Make sure that the number of
characters you use to replace any settings match EXACTLY the
number of characters you replace. In addition, a file containing
settings from one FMC2000 can also be used in other FMC2000s.

14.10 Restore Configuration

This restores the configuration saved on the SD card.
When you restore a configuration from an SD card, all current
settings are overwritten and cannot be retrieved.
FMC2000 User's Guide
IMPORTANT!
CAUTION!
48