Sensor Type; Unit; Low; High - Honeywell FMC2000 User Manual

3. Press Back to return to the Wireless Detector Settings menu
without saving your changes, or press Exit to return to the
monitoring screen without saving your changes.

15.4 Sensor Type

(R) This tells you the type of sensor in the remote monitor.

15.5 Unit

(R) This tells you the measurement unit for the sensor (such as
ppm or ppb).

15.6 Low

(W) This sets the low alarm point at which an alarm sounds.
Changes made to detector settings are wirelessly transmitted to all
detectors on the network.
1. Press Enter.
2. Press number keys to enter a new low alarm value.
3. Press Back to return to the Wireless Detector Settings menu
without saving your changes, or press Exit to return to the
monitoring screen without saving your changes.

15.7 High

(W) This sets the high alarm point at which an alarm sounds.
1. Press Enter.
2. Press number keys to enter a new high alarm value.
3. Press Back to return to the Wireless Detector Settings menu
without saving your changes, or press Exit to return to the
monitoring screen without saving your changes.

15.8 STEL

(R) This gives a readout of the STEL value.
FMC2000 User's Guide
51