Operating The Fmc2000; Turning The Fmc2000 On - Honeywell FMC2000 User Manual

8 Operating The FMC2000

The FMC2000 starts up quickly and requires no intervention on
the part of the user, other than turning on the power switch. Once
it is powered up, the FMC2000 performs self-tests and
automatically initiates communications.
8.1

Turning The FMC2000 On

1. Connect the FMC2000 to a source of AC power.
2. With the FMC2000 turned off, unlock the front panel with the
key, and flip the small toggle switch located next to the SD
card.
Switch in "on" position
LEDs inside the FMC2000 indicate proper operation:
• If the radio transmitter is on, the LED next to it should
blink.
• If datalogging is turned on, the LED next to the SD card
should blink.
3. Close and lock the front panel.
FMC2000 User's Guide
22
Switch in "off" position