Check (Alarm Details) - Honeywell FMC2000 User Manual

11.4 Check (Alarm Details)

1. Press the Check/right-arrow button.
2. The pop-up screen appears labeled Alarm Detail Info. It
contains information about the first alarm.
3. When you are done viewing the screen, press the Check/right
arrow button again.
4. If you want to reset the alarm, enter the 4-digit password (the
default value is 1234).
5. Press Enter.
This exits the alarm check and returns to the normal operation
screen.
Note: If you do not want to clear the alarm, skip steps 4 and 5, and
press the left-arrow key. The FMC2000 returns to normal
monitoring.
FMC2000 User's Guide
31