Avaya 1600 Series Installation And Maintenance Manual page 56

Troubleshooting Guidelines
Table 1: Parameter Values (continued)
Name
Router
File server
Call server
802.1X
Group
Protocol:
GigE Adapter
Button Module 1
56 1600 Series IP Telephone Installation and Maintenance Guide
System Value
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn.nnnnn
nnn.nnn.nnn.nnn.nnnnn
If DOT1X = 0
If DOT1X = 1
If DOT1X = 2
nnn
cccccccc
filename.ext
cccccccc Ethernet
bootcodename
cccccccccccccc
cccccccccccccc
Format
Up to 15 ASCII characters:
the IP address of the router in use.
Up to 21 ASCII characters: IP address
and port of last file server used
successfully during initialization or
"0.0.0.0" if no file server was used
successfully.
Up to 21 ASCII characters: IP address
and port of the call server currently in
use, otherwise "0.0.0.0."
Pass-thru mode.
Pass-thru with Logoff.
Supplicant mode.
Up to 3 ASCII numeric characters:
GROUP value.
Up to 8 ASCII characters, currently only
"H.323."
4 to 32 ASCII characters (primary
application).
2 to 8 ASCII characters,
either"1000Mbps", "100Mbps",
"10Mbps", or "No."
1 to 32 ASCII characters (backup image
name).
14 ASCII characters. Version identifier
of the GigE Adapter software, if
applicable.
14 ASCII characters. Version identifier
of the software in the first Button
Module, if applicable.
2 of 2