Avaya 1600 Series Installation And Maintenance Manual page 11

Verify These Network Requirements (continued)
3. The following circuit packs are installed on the switch:
TN2602 IP Media Processor circuit pack. Sites with a TN2302 IP Media
●
Processor circuit pack must also install a TN2602 circuit pack.
TN799B, C, or D Control-LAN (CLAN) circuit pack.
●
!
Important:
4. The Avaya Media Server is configured correctly, as described in the 1600 Series IP
Telephone Administrator Guide and Avaya Communication Manager
documentation. Both documents are available at
http://www.avaya.com/support.
5. The DHCP server and application are administered as described in the 1600 Series
IP Telephone Administrator Guide.
6. The HTTP server and application are administered as described in the 1600 Series
IP Telephone Administrator Guide.
7. The upgrade script and application files from the Avaya Support Web site,
http://www.avaya.com/support, are loaded correctly on the HTTP/HTTPS server.
8. If applicable, the DNS server is administered as described in the 1600 Series IP
Telephone Administrator Guide.
9. If applicable, the WML server is administered as described in the 1600 Series IP
Telephone Administrator Guide.
Notes:
- Any or all of the server applications mentioned in items 5.-9. can be co-resident on the
same hardware, subject to the specific restrictions of each individual application.
- See the 1600 Series IP Telephone Administrator Guide for more information about:
administering other network equipment,
●
administering applications like firewalls, and
●
information about topics like port utilization.
●
Note:
Requirements to Verify for Each IP Telephone
10. You have an extension number and an Avaya Communication Manager security
code (password) for each applicable IP telephone. If your call server supports
unnamed registration, and the telephone settings file allows unnamed registration,
you do not need to provide an extension or password for the telephone. However, if
you do not provide an extension or password, the telephone will have very limited
telephone functionality. (For information, see
11. A Category 5e LAN jack is available at each telephone site.
12. Electrical power is provided to each telephone by a Telephone Power Module (DC
power jack) (must be ordered separately). If the LAN will supply IEEE-standard
power to the telephone, no power module is required.
13. 1 Category 5e modular line cord is available for the connection between the IP
telephone and the PC, if applicable.
Important:
IP telephone firmware Release 1.0 or greater requires TN799C V3
or greater CLAN circuit pack(s). For more information, see the
Communication Manager Software and Firmware Compatibility
Matrix on the Avaya support Web site
http://www.avaya.com/support.
Pre-Installation Checklist
Unnamed Registration
Issue 1 April 2007
on page 20.)
11