Usb Play Mix - DigiTech RP360 Owner's Manual

USB Play Mix

This system parameter controls the output mix of
the RP processed signal and USB playback signal
(from your computer)� When this parameter is
set to the center of its controllable range, it will
read "USB:RP" – this represents equal mix levels
between the RP signal and USB playback signal� As
you adjust the control counter-clockwise, you can
vary the USB playback level in relation to the RP
level� As you adjust the control clockwise, you can vary the RP signal level in relation to the USB
playback level� This parameter is only available when a USB connection has been made to the RP�
To edit the USB PLAY MIX parameter:
1�
Connect the RP to your computer using a standard USB cable�
2�
Press the
SYSTEM
3�
Press either the
the upper right-hand corner of the LCD display�
4�
Turn the
EDIT 2
5�
Press the
BACK
the Performance state�
button�
knob or
SELECT SYSTEM
( ) knob to adjust the setting�
USB PLAY MIX
button or any
FOOTSWITCH
1 Plexi-Drive
SYSTEM SETTINGS
USB
LOOPER READY
RECORD LVL
0 dB
button repeatedly until the LCD display reads 2/4 in
to exit the System Settings menu and return to
RP360 / RP360 XP
2/4
USB LCD
PLAY MIX CONTRAST
8
USB:RP
47