Output - DigiTech RP360 Owner's Manual

Output To
This system parameter has two options: AMP and
MIXER� This parameter optimizes the outputs
for connection to an amp or a mixer and is only
available when a connection has been made to the
LEFT OUT or RIGHT OUT connector�
AMP
•
Select this option when connecting to a guitar amplifier� This is the default option selected
whenever a connection is made to the 1/4" LEFT OUT or RIGHT OUT connector�
MIXER
•
Select this option when connecting the 1/4" LEFT OUT/RIGHT OUT connectors directly to a
mixer or recording interface, or when recording through the USB connection� When this option
is selected, the outputs will be optimized for full range speakers, making your guitar's direct
signal sound as though it's being played through a guitar speaker cabinet�
NOTE: When no connection is made to the 1/4" LEFT OUT or RIGHT OUT connector, the
MIXER option will automatically be selected behind the scenes, optimizing the outputs for use
with the 1/8" HEADPHONE output or USB output�
To edit the OUTPUT TO option:
1�
Press the
SYSTEM
indicated by 1/4 being displayed in the upper right-hand corner of the LCD display� If you are
not, press either the
1/4�
2�
Turn the
EDIT 2
3�
Press the
BACK
the Performance state�
RP360 / RP360 XP
44
button� Ensure you are on the first page in the System Settings menu,
knob or
SELECT SYSTEM
( ) knob to select the desired option�
OUTPUT TO
button or any
FOOTSWITCH
1 Plexi-Drive
SYSTEM SETTINGS
FOOTSWITCH

OUTPUT

LOOPER READY
MODE TO
PRESET
AMP
STOMP
MIXER
BANK
button repeatedly until the LCD display reads
to exit the System Settings menu and return to
1/4
OUTPUT
MODE
MONO
STEREO