Ricoh D158 Service Manual page 471

Directly reflects the adjusted value.
Duplex:High (D158/D159)
011
Directly reflects the adjusted value
Reverse:Low (D158/D159)
024
Directly reflects the adjusted value
Reverse:High (D158/D159)
029
Directly reflects the adjusted value
[Zero Cross] (D160/D161/D170)
It reflects the number of zero-cross interrupted times that has beed measured
when frequency is determined.
1902
More than 11 times: 60Hz
Less than 10 times: 50Hz
Less than 3 times: SC547
001 Count Value
[Feed Cl Re-energize]
Directly reflects the adjusted value.
1903

A "+" setting increases the amount of driving.

A "-" setting decreases the amount of driving.
001 By-pass Feed
002 Tray1 Feed
Tray2/3/4
003
(Other Teays)
SM Appendix
*ENG [-4.0 to 4.0 / 0.0 / 0.1 % / step]
*ENG [-4.0 to 4.0 / 0.0 / 0.1 % / step]
*ENG
[-4.0 to 4.0 / 0.0 / 0.1 % / step]
ENG
[0 to 255 / 0 / 1 / step]
*ENG
[-10 to 10 / 0 / 1 mm / step]
*ENG [-10 to 10 / 0 / 1 mm / step]
*ENG [-10 to 10 / 0 / 1 mm / step]
3-13
Main SP Tables-1
D158/D159/D160/D161/D170