Audio Menu - Zenith H27H49S Installation Manual

Audio Menu

Set up the audio menu options for the end user
1
On the remote, press MENU repeatedly to
go to the Audio menu.
2
Using the Up/Down arrow on the remote
control, highlight the audio menu option
you want to change. Choose from:
• Bass: Increases/decreases lower-end
sounds.
• Treble: Increases/decreases higher-end
sounds.
• Balance: Allows you to put the sound
more to the left or right channel.
• Audio Mode: Choose from Stereo sound,
Mono, or 2nd Audio/SAP.
• Audio Lang: Choose from English,
Spanish or French Audio Language. (Only
available on Digital Channels.)
• SoundRite: Turns the uniform volume fea-
ture On and Off.
• Front Surround: Turns front surround
speakers On and Off.
• Speakers: Turns TV speakers On and Off.
• Audio Pref: Selects Custom or Preset.
Use the Left/Right ADJ arrow to adjust or
3
change the option you have selected.
Use Up/Down arrows to choose other Audio
4
menu options, or press ENTER to remove
menu.
Use the Audio button to scan the Audio
A
Languages available for a Digital Channel.
Not all programming is broadcast in stereo
sound or has 2nd Audio SAP.
Not all Digital Channels offer more than
one audio language. (See the next page.)
The audio language selected must actually
contain audio or no sound will be heard.
Page 40
AUDIO MENU
Analog Channel Display
AUDIO MENU
Digital Channel Display
POWER
PRG
VCR
CABLE AUX TV
AUDIO FLASHBK MUTE
CHANNEL
VOLUME VOLUME
CHANNEL
1 2 3
4 5 6
7 8 9
0
ENTER
MENU
A